<------------------ SOLD ------------------> MAVIC 410 (MODOLO) brake calipers - circa 1986 to 1989 (NOS / MODIFIED)
MAVIC 410 brake calipers (modified) - 42 mm to 55 mm "short reach" aluminum alloy calipers - Clear anodized finish - recessed Allen nut mount (...includes second set of center bolts and all hardware for non-recessed acorn nut mounting as well) - C.P.S.C. compliant quick release mechanisms incorporating a technopolymer eccentric (...includes second set of quick release mechanisms) - Clear anodized Silver colored cable barrel adjusters (...includes second set of "stock" Black anodized cable barrel adjusters)- wire formed steel wheel guides - post 1981 and pre 1990 block lettered "MAVIC" logo on the right side of the caliper arms without any markings on the left side - post 1985 and pre 1990 arched triangular cross-section or first generation "aero" profile caliper arms - original plastic fiber center bolt washers replaced with stainless steel versions (...aforementioned duplicate center bolts include a set of original plastic fiber washers) - model 410 road brake : Scott / Mathauser brake pads (modified) - iron oxide Salmon compound - custom tapered at their trailing edge to accommodate MAVIC / Modolo brake shoe profile - 3/16" hole center drilled 3/16" deep on their backside in order to "lock" each pad into its respective MAVIC / Modolo brake shoe - model "C" ... [NOS - includes extra NOS hardware]